MC4 Connector for Solar PV Cables

Due to highly robustness,UV-Resistance,the touch protection a high grade connection is guaranteed for 25 years.

MC4 Connector for Solar PV Cables

Due to highly robustness,UV-Resistance,the touch protection a high grade connection is guaranteed for 25 years.

Product Description

*Photovoltaic cable coupler.

*Due to highly robustness,UV-Resistance,the touch protection a high grade connection is guaranteed for 25 years.

*Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.

 

MC4 Connector

 

Technical Data of Solar Connector:

ltem

SOLAR CONNECTOR

Model Number

WSPVCC

Test Voltage

1000V DC

Overvoltage
Type/Pollution Degree

6000V(50Hz,1min)

Contact Resistance of
Plug Connector

CAT III /2

Contact Resistance of
Plug Connector

lmΩ

Contact Material

Copper, Tin-plated

Insulation Material

PPO

Degree Of Protection

IP2X/IP67

Flame Class

UL94-VO

Safety Class

II

Suitable Cable

OD 4.5-8.5(2.5-6.0mm2)

Insertion
Force/Withdrawal Force

50N/ ≥50N

connecting system

crimp connection

Temperature Range

-40°℃~+125°℃

 

Advantages of Solar Connector:

•Simple, quick, safe and effective filed assembly

• Develop independently, innovative design,have independent intellectual property rights, adaptive to solar connector directly

•High mechanical endurance

•Low transition resistance

•Innovative sealed,waterproof, dust resistance design:IP68

•Excellent plastic material, UL 94-V0, wide temperature range:-40°c to 90°c, weather and UV resistant for long-time outdoor application

•Approved by TUV

 

Assembly instructions for connector of PV-R4C/...Especially

MC4 Connector

 

•During self assembly ,parts and tools other those stated by R&X are used or if the preparation and assembly instructions described here are disregarded then neither safety nor compliance with the technical data can be guaranteed.

•For protection against electric shock ,PV Connectors must be isolated from the power supply while being assembled or disassembled

•The end product must provided protection from electric shock

•Unplugging under load:PV plug connections must not be unplugged while under load.They can be placed in a no load state by switching off the DC/AC converter or breaking the AC circuit interrupter.Plugging and unplugging while under voltage is permitted

•Disconnected connectors should be protected from dirt and water with sealing caps.

•Plugged parts are watertight IP68

 

Assemble the cable and connector

MC4 Connector

 

(Picture 1&2)

Push the crimped contact into the socket resp.Plug insulator until it engages .

Pull lightly on the lead to check that the metal part has engaged.

Screw on the cable gland ,hand-light,with the tools PV-STX,tightening torque about:2.2Nm.

 

Plugging

MC4 Connector

 

(Picture3)

Mount the connector together until they engage.

Check correct engagement by Pulling on the coupling.

 

Unplugging

MC4 Connector

(Picture 4&5)

Compress the two snap-in springs by hand or with PV-STX tool and separate the coupling

Request a Quote

  • wechat

    Janey: +86 138 3311 9023

  • wechat

    Ivy: +86 150 8117 8223

  • wechat

    Chloe: +86 181 3119 7232

Chat with Us